During the test, frequencies of 500, 1000, 2000 and 4000 Hz are sent separately to your left and right ear. You are asked to determine the lowest scan level at which you notice each sound. This test does not produce definitive results and does not make a diagnosis.
On the next screen, sound will come from your left earphone only. Increase the level in a controlled manner until you notice the sound.
If the sound becomes disturbing, reduce the volume immediately.
Do not change the position of your headphones. We will repeat the same procedures for your right ear.
The following values are not dB HL. It just shows the relative output level at which you notice each frequency on this device and headphone.
This screening cannot diagnose hearing loss. If there are ongoing complaints, a significant difference in one ear, tinnitus, or difficulty understanding speech, professional evaluation should be obtained.
This scan produces pure tones at different frequencies through your scanner's audio system. Sounds are sent separately to the left and right channels of the stereo headset. The user records the lowest relative level at which he notices each frequency.
The results are not the actual audiogram or dB HL value because the phone, computer, sound card and headphones used are not clinically calibrated. Therefore, the page should be considered as a preliminary screening and awareness tool rather than a diagnostic hearing test.
500, 1000, 2000 and 4000 Hz tones are used in the test. These frequencies help to compare at a basic level the low, mid and high frequency range that is important in hearing different parts of speech.
If a high level is required to detect one or more tones, if you do not notice a tone at all, or if there is a significant difference between the two ears, it would be beneficial to have a professional hearing evaluation.
You can contact Odyosem to get information about your screening result, have a hearing test or evaluate device options.